Oscam binar

[franta]

intrebare:
s-ar poate face ca din meniul oscamului sa apesi un buton si sa dai disable la toate readerele ( sau la toti userii ) care nu sant locale?
personal mi s-ar parea o astfel de optiune utila cand testezi o linie noua sau cand vrei sa faci update la card si nu vrei sa ai cereri pe alte carduri cand tu nu ai subscriptie valida.
se poate obtine asa ceva prin compilare sau e nevoie ca cei de la oscam sa faca ceva

[dMd]

Exista deja implementata functia asta in oscam, numai ca avem posibilitatea sa dezactivam rederele dorite pe rand. Procedeul e simplu: se intra in Readers si de acolo stabilim care linie vrem sa o dezactivam - in partea stanga avem ON/OFF, mergem pe readerul respectiv si printr-un simplu click pe iconul rosu (Disable this reader) dezactivam acel reader.

[franta]

da dar eu vroiam sa stiu daca se poate da on/off la toate rederele din network in acelasi timp, cred ca optiunea asta nu exista inca si trbuie introdusa de catre oscam

[Levy]

oscam-svn10098-mipsoe20-webif

Versiune simplificata

Code: Select all

| OSCam ver: 1.20-unstable_svn rev: 10098 target: mipsel-unknown-linux-gnu
| Tools:
|  CROSS    = ../oscam/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-
|  CC       = ../oscam/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-gcc
| Settings:
|  CONF_DIR = /etc/tuxbox/config
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -w
|  CFLAGS   =
|  LDFLAGS  = -Wl,--gc-sections -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/home/username/oscam/toolchains/mipsoe20/mipsel-unknown-linux-gnu/sysroot/usr/lib
|  LIBS     = -lpthread -ldl -lrt
|  UseFlags =
| Config:
|  Addons   : WEBIF HAVE_DVBAPI CS_ANTICASC MODULE_MONITOR WITH_LB CLOCKFIX
|  Protocols: NEWCAMD CCCAM CCCSHARE CONSTCW
|  Readers  : CONAX VIACCESS
|  CardRdrs : INTERNAL 
|  Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.15.2) 4.6.3
|  Binary   : ../archiv/oscam-svn10098-mipsoe20-webif

[dMd]

Cine vrea sa testeze doscamV0.24-all.zip

* ...pentru cei ce au dubii, precizez ca versiunea respectiva nu e compilata de mine.

Code: Select all

- CoolAPI-Fix für neuen Apollo/Kronos-Treiber
- Nagra Merlin Support (private build only)
- Seca Nano 01 Support (private build only)


[Levy]

oscam-svn10577-mipsoe20-webif

Code: Select all

+-------------------------------------------------------------------------------
| OSCam ver: 1.20-unstable_svn rev: 10577 target: mipsel-unknown-linux-gnu
| Tools:
|  CROSS    = /home/xxxxxxxx/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-
|  CC       = /home/xxxxxxxx/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-gcc
| Settings:
|  CONF_DIR = /etc/tuxbox/config
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -w
|  CFLAGS   =
|  LDFLAGS  = -Wl,--gc-sections -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/home/xxxxxxxx/toolchains/mipsoe20/mipsel-unknown-linux-gnu/sysroot/usr/lib
|  LIBS     = -lpthread -ldl -lrt
|  UseFlags =
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG HAVE_DVBAPI CS_ANTICASC WITH_LB CW_CYCLE_CHECK CLOCKFIX
|  Protocols: CAMD33 NEWCAMD CCCAM CCCSHARE CONSTCW
|  Readers  : CONAX VIACCESS
|  CardRdrs : INTERNAL
|  Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.15.2) 4.6.3
|  Config   : build/mipsel-unknown-linux-gnu/config.mak
|  Binary   : ../archiv/oscam-svn10577-mipsoe20-webif
+-------------------------------------------------------------------------------

[dMd]

OSCam-svn10615-sh_4-webif-libusb-oscam-emu by Satelit-Info.com

Code: Select all

+-------------------------------------------------------------------------------
| OSCam ver: Satelit-Info.com rev: 10615 target: sh4-streamboard-linux-gnu-libusb
| Settings:
|  CONF_DIR = /var/keys
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -w
|  CFLAGS   = -DWITH_LIBUSB=1
|  LDFLAGS  = -Wl,--gc-sections -DWITH_LIBUSB=1 -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L../toolchains/sh_4/sh4-streamboard-linux-gnu/sysroot/usr/lib
|  LIBS     = -lusb-1.0 -lrt -lpthread -ldl -lrt
|  UseFlags = USE_LIBUSB=1
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG HAVE_DVBAPI IRDETO_GUESSING CS_ANTICASC MODULE_MONITOR WITH_LB CW_CYCLE_CHECK CLOCKFIX WITH_EMU
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE CONSTCW
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD BULCRYPT
|  CardRdrs : PHOENIX INTERNAL SMARGO SMART
|  Compiler : sh4-streamboard-linux-gnu-gcc (crosstool-NG 1.16.0) 4.6.3
|  Config   : build/sh4-streamboard-linux-gnu-libusb/config.mak
|  Binary   : ../oscam-svn10615-sh_4-webif-libusb-oscam-emu-by_Satelit-Info.com
+-------------------------------------------------------------------------------


DOWNLOAD oscam-svn10615-sh_4-webif-libusb-oscam-emu

[Meridian]

@dMd - Multumim pentru aport! Am folosit pana acum versiunea 9980 compilata de tine si s-a comportat foarte bine! Asteptam cu placere si alte actualizari!

[dMd]

Oscam-svn10649-sh_4-webif-libusb-oscam-emu_by_Satelit-Info.com
Rog pe cei cu receptoare compatibile sh_4 sa testeze si sa spuna daca este functional (eu nu am receptor sh_4 si dupa compilare nu pot testa daca e ok si cum functioneaza).

Code: Select all

...:::Changeset 10649:::...

    Fix for chk_port_tab, 'prids' index should be set to 0 for every 'filts' index change

 http://www.streamboard.tv/oscam/changeset/10649

+-------------------------------------------------------------------------------
| OSCam ver: Satelit-Info.com rev: 10649 target: sh4-streamboard-linux-gnu-libusb
| Tools:
|  CROSS    = ./toolchains/sh_4/bin/sh4-streamboard-linux-gnu-
|  CC       = ./toolchains/sh_4/bin/sh4-streamboard-linux-gnu-gcc
| Settings:
|  CONF_DIR = /var/keys
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -w
|  CFLAGS   = -DWITH_LIBUSB=1
|  LDFLAGS  = -Wl,--gc-sections -DWITH_LIBUSB=1 -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L./toolchains/sh_4/sh4-streamboard-linux-gnu/sysroot/usr/lib
|  LIBS     = -lusb-1.0 -lrt -lpthread -ldl -lrt
|  UseFlags = USE_LIBUSB=1
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG HAVE_DVBAPI CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CW_CYCLE_CHECK CLOCKFIX WITH_EMU
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE CONSTCW
|  Readers  : NAGRA CONAX VIACCESS
|  CardRdrs : INTERNAL SMARGO SMART
|  Compiler : sh4-streamboard-linux-gnu-gcc (crosstool-NG 1.16.0) 4.6.3
|  Config   : build/sh4-streamboard-linux-gnu-libusb/config.mak
|  Binary   : ./oscam-svn10649-sh_4-webif-libusb-oscam-emu-patched_by_Satelit-Info.com
+-------------------------------------------------------------------------------

...:::http://satelit-info.com/phpBB3/index.php:::...


[Meridian]

@dMd - Oscam-svn10649-sh_4 functioneaza. Ruleaza bine! Multumiri pentru efortul depus!