Sbox Focus+Digi.

[dic_star79]

Am cardul nagra care functioneaza corect , acum vreau sa pun si cardul 2, un card de focus in acelasi receptor. Am testat ambele readere cu smartcardul nagara ca sa fiu sigur ca sunt functionale si sunt ok, care sunt pasi de a porni cardul de focus in sbox, ce trebuie setat in user.sbox, user.cfg si in cccam cfg. Am incercat sa il pornesc dar nu vrea, posibil ca nu sunt setarile corecte.

[zmeura]

Acum ar trebui sa ai cam asa:

Code: Select all

[main]
server_only=1            # 0=mixed mode 1=only server
log=0               # 0=no log 1=log to /tmp/sbox.log   //ALWAYS USE 0//
logudp=192.26.0.1:3354         # server ip:server port
userspath=/var/bin/users.sbox      # users list
channelinfo=/var/bin/sbox.channelinfo   # channel info
webinterface=1            # 1=web interface on 0=web interface off
webadmin=root:admin         # user:pass for webinterface
webport=81            # web interface port
rdgserver=0            # 0=radegast server off 1=radegast server on
rdgport=16050            # radegast server port
use_nagra=1            # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=                               # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000            # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1            # 0=betatunnel support disabled 1=betatunnel support enabled

[slot0]
active=1            # 0=inactive 1=active
sci=/dev/sci0            # lower
ncdserver=1            # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314   # newcamd deskey
port=15000            # newcamd port
mhz=357            # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1            # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=5               # how many ecms can be cached, 0 or less=cache disabled

#Nagra2/3 Example
[xxxxxx]            # nagra2 camid (4 bytes)
rsa=xxxxxx               # rsa "n" from this card (like newcs)
boxkey=xxxxx         # boxkey from this card
emm=0               # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=1            # use portlist or no
portlistpath=/var/keys/port.list   # path from port.list
#controlsid=3:0            # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid

Adaugi setari pentru readerul de oe celelalt slot si cu alt port pentru linia newcamd:

Code: Select all

[slot1]
active=1            # 0=inactive 1=active
sci=/dev/sci1            # upper
ncdserver=1            # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314   # newcamd deskey
port=15001         # newcamd port
mhz=357            # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1            # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=5               # how many ecms can be cached, 0 or less=cache disabled


Si eventual setarile suplimentare,despre care nu pot sa spun prea multe,daca trebuie trecut CAMID iti apare in log care e si il treci in loc de ce e pus cu litera C ,in rest lasi asa:

Code: Select all

#Conax Example
[CCCCCCCC]            # conax camid (4 bytes)
emm=0               # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0            # use portlist or no
portlistpath=            # path from port.list
rsa=               # rsa ecm used on paired cards
controlsid=0:0            # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid

Opreste cccam si seteaza sbox sa functioneze ca emu: server_only=1 + restart sbox
Ar trebui sa iti deschida numai cu sbox de pe ambele carduri.Daca e in regula mergi mai departe si faci user nou in users.sbox:

Code: Select all

NC=user parola slot1 0 300 127.0.0.1

si in ccam.cfg linie :

Code: Select all

N: 127.0.0.1 15001 user parola 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Setezi iar server_only=0 si le dai drumul la amandoua,ar trebui sa le vezi in cccam.

[dic_star79]

La Focus imi da fail:
02:02:57 newcamd 15000: ecm cccam [1802:000000:0D70] portlist (0ms) |
02:02:58 newcamd 15000: ecm cccam [1802:000000:0067] portlist (0ms) |
02:03:02 newcamd 15000: ecm cccam [1802:000000:0D34] [81308F078DDE1221B13A...] ok (297ms) |
02:03:07 newcamd 15000: ecm cccam [1802:000000:01C9] portlist (0ms) |
02:03:08 newcamd 15000: ecm cccam [1802:000000:0134] portlist (0ms) |
02:03:12 newcamd 15000: ecm cccam [1802:000000:0D34] [80308F078D59CC28D877...] ok (297ms) |
02:03:15 newcamd 15000: ecm cccam [1802:000000:0366] portlist (0ms) |
02:03:17 newcamd 12000: ecm focus [0B02:000000:78C5] [807049704243209DE478...] fail (180ms) |
02:03:19 newcamd 15000: ecm cccam [1802:000000:03F6] [81308F078D8FFC2995B3...] ok (272ms) |
02:03:22 newcamd 15000: ecm cccam [1802:000000:0D34] [81308F078D283C26A456...] ok (296ms) |
02:03:23 newcamd 15000: ecm cccam [1802:000000:03F0] [80308F078D3337299C0D...] ok (291ms) |
02:03:23 newcamd 15000: ecm cccam [1802:000000:0D7A] [80308F078D1EBC2C38C9...] ok (290ms) |
02:03:31 newcamd 15000: ecm cccam [1802:000000:01C8] portlist (0ms) |
02:03:32 newcamd 15000: ecm cccam [1802:000000:0D34] [80308F078D24CD27AD8B...] ok (296ms) |
02:03:33 newcamd 15000: ecm cccam [1802:000000:03EB] [80308F078DD22521F54A...] ok (297ms) |
02:03:39 newcamd 12000: ecm focus [0B02:000000:778A] [80704970424320926401...] fail (180ms) |
02:03:42 newcamd 15000: ecm cccam [1802:000000:0D34] [81308F078DA60E2ED5DE...] ok (297ms) |
02:03:45 newcamd 15000: ecm cccam [1802:000000:75F9] portlist (0ms) |
Inca nu am pus un port list pentru Focus.

[zmeura]

Sunt cereri locale facute de receptorul tau pe programe din care trebuie sa deschida?Ai pus CAMID?
Vezi si ce apare dupa restart legat de cardul Focus,daca e totul ok.

[dic_star79]

Nu pot sa verific momentan starea cardului daca imi deschide in sbox pentru ca antena este la umbra din cauza viscolului, stiu ca a fost activat doar ca nu a facut update la toate pachetele.
/dev/sci0 0B02 Conax 001010 1E3DC54 01.02.2014 28.02.2014 FocusSat
/dev/sci0 0B02 Conax 001010 1A05C1D 01.10.2013 31.10.2013 FocusSat
/dev/sci0 0B02 Conax 002010 1585151 01.02.2014 28.02.2014 ESS
/dev/sci0 0B02 Conax 002010 1001151 01.10.2013 31.10.2013 ESS
Asa arata in sbox, am pus CAMID.
Aici ai datele cand porneste sboxul :


2:20:20 Welcome to SBox (for MIPS)
02:20:20 Version: 0.0.5-4 #4 tests (28/09/2013)
02:20:20 WebPage: http://www.sboxobs.tk
02:20:20
02:20:20 sbox: checking for /usr/bin/sbox.conf... OK
02:20:20 io: sci device detected
02:20:22 reset: got atr on slot0
02:20:22 reset: atr xxxxxx
02:20:22 reset: hist xxxxxx
02:20:22 reset: char 0 B 0 0
02:20:22 reset: working at 3.680Mhz (max 5.000Mhz)
02:20:22 sbox: conax card init
02:20:22 portlist: readed 0 entries
02:20:22 conax: serial xxxxxx (xxxxxx)
02:20:22 conax: provider 00, id 000000, ppua 002B8B53, caid 0B02
02:20:22 conax: card init ok
02:20:22
02:20:22 newcamd: user=focus, pass=focus, au=0, timeout=150 added to db=0
02:20:22 newcamd: server 12000 init ok
02:20:22 cache: init ok for card=0
02:20:22 io: sci device detected
02:20:23 reset: got atr on slot1
02:20:23 reset: atr xxxxxx
02:20:23 reset: hist xxxxxx
02:20:23 reset: char xxxxx
02:20:23 reset: crl 12
02:20:23 reset: working at 3.680Mhz (max 5.000Mhz)
02:20:23 sbox: nagra card init
02:20:23 nagra: serial xxxxxx (xxxxx)
02:20:23 portlist: readed 60 entries
02:20:23 nagra: provider 00, id 002011, ppua 4CE8D086, caid 1802
02:20:23 nagra: provider 01, id 002111, ppua 4CE8D086, caid 1802
02:20:24 nagra: card init ok

[zmeura]

Pare in regula,dar nu deschide din localul tau.Trebuie sa verifici daca e ok cardul,daca deschide,eu trag de el dar nu vrea,numai din hop2.

[dic_star79]

Am reusit sa montez antena la locul ei, am pus cardul de focus in receptorul lor si este ok, functioneaza, am pus cardul in DM si pornit doar sbox, arata asa:
7:20:33 stream 0: re-reading pmt.tmp (sid 0x76C4)
17:20:33 stream 0: ecmpid 0x15E2, caid 0x0B02, prov 0x000000, system Conax
17:20:33 stream 0: emmpid 0x0309, caid 0x0D02, prov 0x000000, system CryptoWorks
17:20:33 stream 0: emmpid 0x0378, caid 0x1815, prov 0x000000, system NagraVision
17:20:33 stream 0: emmpid 0x03E7, caid 0x0B02, prov 0x000000, system Conax
17:20:33 stream 0: emmpid 0x03E6, caid 0x0B00, prov 0x000000, system Conax
17:20:33 stream 0: emmpid 0x030A, caid 0x0D97, prov 0x000000, system CryptoWorks
17:20:33 stream 0: emmpid 0x030C, caid 0x0653, prov 0x000000, system Irdeto
17:20:33 stream 0: emm [0B02:000000:03E7] [827082000000002B8B53...] ok (278ms)
17:20:42 stream 0: emm [0B02:000000:03E7] [827082000000002B8B53...] ok (278ms)
17:20:52 stream 0: emm [0B02:000000:03E7] [827082000000002B8B53...] ok (278ms)
Dar nu se deschide canalul, nimic , nimic. Ce sa fie oare?

[dic_star79]

Sa fie ca nu am port list pt focus ? Sau trebuie trecut Caidul si IDENT in sbox cfg ?

[zmeura]

Ce ai acolo sunt doar emm-uri,nu vad cereri ecm.Trebuie sa mearga si fara port.list

[delta2k2]

Poate eşti in buchetul de canale de la Digi, şi de asta nu ai cereri pentru Focus