CCcam.cfg - descriere

[keop5]

mda ai dreptate

maine am vreme sa umblu la cfg
am gasit asta pe net, pare ok


#C: hostname(al meu) 12000 asta e linia mea
#################################################
########## CCcam Cfg Configurari #############
#################################################

############## C lines ############################
C:

############## F lines ############################
F:

############## N lines ############################
N:

#################################################
########### Other config settings #####################
#################################################
SECA HANDLER: 2
SERVER LISTEN PORT: 12000
WEBINFO LISTEN PORT: 16001
WEBINFO USERNAME : user (no root)
WEBINFO PASSWORD : pass (no dreambox)
TELNETINFO USERNAME : user (no root)
TELNETINFO PASSWORD : pass (no dreambox)
TELNETINFO LISTEN PORT : 16000
ZAP OSD TIME : 3
OSD USERNAME : user (no root)
OSD PASSWORD : pass (no dreambox)
OSD PORT : 80
MINI OSD : yes
DISABLE EMM: yes
DEBUG: yes
SHOW TIMING: yes
SHOW EXTENEDED CLIENT INFO : no
ALLOW WEBINFO: yes
NEWCAMD CONF : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#SMARTCARD SID ASSIGN : /dev/sci0 0 { }
SERIAL READER : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 375000

#################################################
################# E N D ########################
#################################################

[andym02]

am gasit asta pe net, par ok

iar cu copy / paste , chiar este greu sa citesti un pic , sunt cateva randuri OK .
in fine :
#SMARTCARD SID ASSIGN : /dev/sci0 0 { ......... } , numai daca ai card local activ , insa fara acel " # " in fata
SERIAL READER : /dev/sci0 , numai daca ai card local activ introdus in "readerul" DM 500s
SMARTCARD CLOCK FREQUENCY: /dev/sci0 375000 , numai daca ai card local activ de Focus ( 375000 )

cam asta-i cu copy / paste , le nimeresti , ori ba

P.S. in penultima postare a ta am observat ceva de genu :
SERIAL READER : /dev/tts/0
PHOENIX READER PATH : /dev/tts/0
> asta se foloseste cand ai un cititor phoenix , ai asa ceva ?
> daca ai , unde a definit frecventa cardului ?

> #BOXKEY: /dev/sci0 0A DE 2B 66 asta este de cand mergea dolce in 3C
Alte banalitati :
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
#CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#CAMDATA: /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Setarea asta cu CAM este specifica si folosita DOAR daca ai card irdeto din ala unde trebuia definit ceva... care acum a disparut de la provideri , sau cine stie .......... inc-or mai fi .

UN SFAT imi permit sa-ti dau , un pic de studiu , un pic de atentie , citeste ce ai vazut postat de DMD , Zmeura , Asix ...etc si-o sa-ti functioneze garantat .
Nu mai cauta pe n'spe mii de forumuri fel de fel de nebunii , trebuie tu sa intelegi ce trebuie facut .

succeeessssssss !

[keop5]

mersi....

[allsattnt]

Salut.
Pentru un card TVR in cccam am ,,NEEDINIT,, .
De ce?
Am omis ceva?
Am asa:

SERVER LISTEN PORT: xxxx
SERIAL READER : /dev/sci0
ALLOW TELNETINFO: no
ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : xxxx
WEBINFO USERNAME :
WEBINFO PASSWORD :
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3750000
SHOW TIMING : yes
EXTRA EMM LEVEL : no
DISABLE EMM : no
SOFTKEY FILE : /usr/keys/SoftCam.Key
STATIC CW FILE : /usr/keys/constant.cw
CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
SHOW EXTENDED CLIENT INFO: yes
SMARTCARD SID ASSIGN : /dev/sci0 0 { 0001 , 0002 , 0003 , 0004 , 000A ,000F }
SECA HANDLER: 1

CCcam.prio :
P: 0b02:000000 # tvr

[allsattnt]

Salut.
Pentru un card TVR in cccam am ,,NEEDINIT,, .
De ce?
Am omis ceva?
Am asa:

Code: Select all

SERVER LISTEN PORT: xxxx
SERIAL READER : /dev/sci0
ALLOW TELNETINFO: no
ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : xxxx
WEBINFO USERNAME :
WEBINFO PASSWORD :
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3750000
SHOW TIMING : yes
EXTRA EMM LEVEL : no
DISABLE EMM : no
SOFTKEY FILE : /usr/keys/SoftCam.Key
STATIC CW FILE : /usr/keys/constant.cw
CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
SHOW EXTENDED CLIENT INFO: yes
SMARTCARD SID ASSIGN : /dev/sci0 0 { 0001 , 0002 , 0003 , 0004 , 000A ,000F }
SECA HANDLER: 1

CCcam.prio :
P: 0b02:000000 # tvr

[andym02]

ai reusit ?

incearca varianta asta :

SERVER LISTEN PORT: xxxx
SERIAL READER : /dev/sci0
ALLOW TELNETINFO: no
ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : xxxx
WEBINFO USERNAME :
WEBINFO PASSWORD :
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3750000 ( aici nu stiu frecventza , n-o fi 500 .....)
SHOW TIMING : yes
EXTRA EMM LEVEL : no
DISABLE EMM : no
SOFTKEY FILE : /usr/keys/SoftCam.Key
STATIC CW FILE : /usr/keys/constant.cw
CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
SHOW EXTENDED CLIENT INFO: yes
#SMARTCARD SID ASSIGN : /dev/sci0 0 { 0001 , 0002 , 0003 , 0004 , 000A ,000F }
#SECA HANDLER: 1

[allsattnt]

AM INCERCAT SI CU 500(PE OSCAM AM CU 500 SI MERGE),DAR NU VREA.I-AM DAT SI CU 600 DAR TOT DEGEABA.

[hotm]

Salutare,

Intrebare pentru cei care stiu: am linii C de la peersi si vreau doar Digi si Focus (eventual ce se mai decodeaza pe 1 grad west) maxim hop 2
Cum trebuie sa introduc in linia mea C din CCcam.cfg si ce CAIDuri trebuie sa contina ? Am bagat linia de mai jos si imi apar si alte CAIDuri decat cele trecute acolo. Ce fac gresit?

C: 192.168.1.2 12000 user2 pass2 no { 1802:0:2, 1880:0:2, 1801:0:2, 2111:0:2, 0b02:0:2, 0d02:0:2, 0d97:0:2, 0653:0:2 }
Te conecteaza la 192.168.1.2 pe portul 12000 cu user2 si pass2

no = foloseste emulatorul serverului
0 = orice provider
0 = orice program
3 = maxim 3 hops
, = continuare
b02 = provider
0 = orice program
4 = maxim 4 hops

Digi TV
1802
1880
1801
2111

Focus Sat
0b02

UPC
0d02
0d97
0653

Mai sunt si unele carduri Irdeto, insa nu stiu CAID

[ASiX88796]

»
Sintaxa pentru o linie C este:

Code: Select all

C: <hostname> <port> <username> <password> <wantemus> ( { caid:id(:uphops), caid:id(:uphops), ... } )

Ca să primești doar un anume provider de pe hop 2 trebuie să-i setezi caid:id:2 și să le negi pe celelealte cu 0:0:0

De exemplu ca să primești doar CAiD 0b02 din maxim hop 2 linia ta trebuie să fie așa:

Code: Select all

C: 192.168.1.2 12000 user2 pass2 no { 0b02:0:2, 0:0:0 }

Asta se traduce cu acceptare CAiD 0b02, ProvID 0 (toate) din maxim hop 2 și CAiD 0 (adică restul de toate), ProvID 0 (toate) din hop 0 (adică niciunul).

Linia ta completă ar trebui să arate cam așa:

Code: Select all

C: 192.168.1.2 12000 user2 pass2 no { 1880:0:2, 1802:0:2, 1801:0:2, 0b02:0:2, 0d02:0:2, 0d97:0:2, 0653:0:2, 0:0:0 }

Greșeala a fost că nu ai pus 0:0:0 și eu nu am înțeles ce e cu 2111:0:2, probabil tot o greșeală (nu știu să existe CAiD 2111). Există un ProvID 2111 la DiGi dar dacă pui 0 atunci și 2111 este inclus. Dacă vrei neapărat 2111 atunci pui 1801:002111:2. Pe de altă parte, nu există CAiD 1801 pe satelit 1W, DiGi folosește CAiD 1801 doar pe cablu.

[hotm]

Multumesc. M-ai luminat!
2221 stiam ca era parca Digi. My mistake!
Care ar fi caidurile corecte pentru Focus si Digi
si care ar fi pentru alti provideri pe 1W ?