Satelit-Info.com

Salut,
scuze daca voi avea o postare mai lunga dar as vrea sa fiu cat mai detaliat.Am 3 carduri ro, 2 digi (1802 si 1880 pe un vu solo 4k) si un 0b02 pe un phoenix/smartmouse.Din 1802 nu mai am lumina pe nici un canal, cardul primeste emm-uri non stop, readerul pare ok dar dvbapi nu vrea sub nici o forma sa se agate de el. Din pacate nu mai am receptorul original asa ca am facut reinitializare card pe site-ul digi, am sunat si am zis ca am "NOTA 10 SMART CARD EXPIRAT" dar nu am rezolvat nimic.1880 si 0b02 nu au nici o problema, nu stiu ce sa ii mai fac, asa ca sper ca cineva de aici sa ma ajute. Setarile oscam di VU sunt:

oscam server:

[reader]
label = digi_1880
enable = 0
protocol = internal
device = /dev/sci0
caid = 1880
boxkey =
rsakey =
ecmwhitelist = 89
detect = cd
nagra_read = 1
mhz = 450
cardmhz = 2700
ident = 1880:000000,002011,002111,002113
group = 2
emmcache = 1,3,2,0

[reader]
label = digi_1802
protocol = internal
device = /dev/sci1
caid = 1802
boxkey =
rsakey =
ecmwhitelist = 92
detect = cd
nagra_read = 1
mhz = 450
cardmhz = 2700
ident = 1880:000000,002011,002111
group = 3
emmcache = 1,3,2,0

oscam user:

[account]
user = dvbapiau
pwd = dvbapiau
monlevel = 4
au = 1
group = 1,2,3

oscam conf:

[global]
disablelog = 1
logfile = /media/hdd/oscam/oscam.log
clienttimeout = 4000
fallbacktimeout = 1000
clientmaxidle = 0
unlockparental = 1
nice = 1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
usrfile = /tmp/oscamuser.log
cwlogdir = /tmp/oscam/cw
lb_mode = 10
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_reopen_seconds = 12
lb_force_reopen_always = 1
lb_retrylimit = 1600
lb_stat_cleanup = 6
lb_savepath = /tmp/.oscam/stat
lb_retrylimits = 1802:800,1880:1000,1805:1000,1843:700,1830:1800,0100:1400,0963:440,09CD:430,093B:430,0919:430,098C:280,09C4:380,09C7:600,090F:2050,093E:1850,0100:3200,0500:500,0B00:3200,0B01:3200,0B02:1000,0BAA:1400
ecmfmt = c&p/i/d/s/l:h
failbantime = 30
failbancount = 30
disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091F:000000

[cache]

[newcamd]
port = 11000@0000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
nodeid = 63D652E810B5156C
version = 2.3.0
reshare = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvbapiau
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 11282
httphelplang =
httprefresh = 15
httppollrefresh = 8
httphidetype = shx
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

Pun si un log:

2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [internal] detect native nagra card
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [internal] ready for requests
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [internal] found card system nagra
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] ROM: D N A S P 1 4 2
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] REV: R e v G 0 6
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] SER: ############
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] CAID: 1802
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] Prv.ID: 00 00 20 11 (sysid)
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] Prv.ID: 00 00 00 00
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] IRD ID: ############
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] active to: 2020/07/25 12:59
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] -----------------------------------------
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |id |tier |valid from |valid to |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] +----+--------+------------+------------+
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|121A |2020/04/01 |2020/07/25 |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|0040 |2017/02/09 |2020/07/22 |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|0083 |2020/04/01 |2020/07/25 |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|2488 |2020/04/01 |2020/07/25 |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|0067 |2020/04/01 |2020/07/25 |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|244A |2020/04/01 |2020/07/25 |
2020/04/02 00:22:20 1DC5366E r (reader) digi_1802 [nagra] |2111|F639 |2020/04/01 |2020/07/25 |
2020/04/02 00:22:21 1DC5366E r (reader) digi_1802 [nagra] |2111|244B |2020/04/01 |2020/07/25 |
2020/04/02 00:22:21 1DC5366E r (reader) digi_1802 [nagra] |2111|0065 |2020/04/01 |2020/07/25 |
2020/04/02 00:22:21 1DC5366E r (reader) digi_1802 [nagra] -----------------------------------------
2020/04/02 00:22:23 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:22:28 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:22:33 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:23:05 75B4A9F0 c (-) -- Skipped 6 duplicated log lines --
2020/04/02 00:23:05 75B4A9F0 c (dvbapi) Demuxer 0 stopped descrambling for program 76D5 (Antena 1.)
2020/04/02 00:23:05 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1802 ECM_PID: 1486 PROVID: 000000
2020/04/02 00:23:05 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1880 ECM_PID: 1487 PROVID: 000000
2020/04/02 00:23:05 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B02 ECM_PID: 1488 PROVID: 000000
2020/04/02 00:23:05 75B4A9F0 c (dvbapi) Demuxer 0 found 3 ECM pids and 2 STREAM pids in CA PMT
2020/04/02 00:23:05 75B4A9F0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2020/04/02 00:23:10 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:23:11 75B4A9F0 c (config) 19 service-id's loaded in 0 ms
2020/04/02 00:23:15 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:23:37 75B4A9F0 c (-) -- Skipped 2 duplicated log lines --
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 stopped descrambling for program 055F (B1 TV)
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1802 ECM_PID: 189F PROVID: 000000
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1880 ECM_PID: 18A0 PROVID: 000000
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B02 ECM_PID: 18A1 PROVID: 000000
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 found 3 ECM pids and 2 STREAM pids in CA PMT
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2020/04/02 00:23:37 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:23:43 75B4A9F0 c (-) -- Skipped 1 duplicated log lines --
2020/04/02 00:23:43 75B4A9F0 c (config) 20 service-id's loaded in 0 ms
2020/04/02 00:23:46 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:23:48 75B4A9F0 c (dvbapi) Demuxer 0 stopped descrambling for program 0B50 (Romania TV)
2020/04/02 00:23:48 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1802 ECM_PID: 1066 PROVID: 000000
2020/04/02 00:23:48 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1880 ECM_PID: 1067 PROVID: 000000
2020/04/02 00:23:48 75B4A9F0 c (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in CA PMT
2020/04/02 00:23:48 75B4A9F0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2020/04/02 00:23:53 75B4A9F0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/04/02 00:23:54 75B4A9F0 c (config) 21 service-id's loaded in 0 ms
2020/04/02 00:23:55 75B4A9F0 c (dvbapi) Demuxer 0 stopped descrambling for program 03EE (Prima)
2020/04/02 00:23:55 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1802 ECM_PID: 1016 PROVID: 000000
2020/04/02 00:23:55 75B4A9F0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1880 ECM_PID: 1017 PROVID: 000000
2020/04/02 00:23:55 75B4A9F0 c (dvbapi) Demuxer 0 found 2 ECM pids and 3 STREAM pids in CA PMT
2020/04/02 00:23:55 75B4A9F0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

Nu am filtrat momentan nimic in oscam services sau whitelist, am lasat setarile de baza dar tot nu vrea.

Postez si cateva lightshoturi:

http://prntscr.com/rr5hnq
http://prntscr.com/rr5i59
http://prntscr.com/rr5ikk

Va multumesc anticipat.

»
1) AU la card DiGi poți face în orice receptor de la DiGi, nu trebuie neapărat în cel cu care este împerecheat;
2) trebuie să iei în calcul și varianta unui card defect, dar asta ca o ultimă opțiune (se mai întâmplă).

Revenind la OScam, ai niște setări foarte stufoase. Tu le-ai făcuat sau le-ai luat de pe net?

Încercând să depanăm sistemul prima recomandare ar fi să izolezi readerul și clientrul într-un grup separat. Văd că readerul e în grup 3 așa că pune și clientul doar în group 3 și încearcă să vezi ce zice.

[account]
group = 3

Aș mai pune și lb_mode = 0 (pe perioada depanării) căci ai multe setări pe acolo.
Scoate și ecmwhitelist = 92.
Schimbă din 0 în 1 waitforcards = 1
La [dvbapi] enabled = 1 au = 1 schimbă în au = digi_1802,digi_1880

...

salut,
daca nu era statul in casa cu tot circul "COVID-19", probabil ca nu as fi controlat oscam-ul.Cardul 1802 a fost ok o lunga perioada de timp dar din lipsa de timp, nu am mai controlat in ultimele luni, prin urmare rezulta expirat. Astazi am sunat iarasi la digi si
s-a rezolvat. Chestia nasoala era ca nu mai am nici un receptor digi.Cardurile au mers foarte bine pe un cititor quad by Gelvis dar acum cateva zile vedeam entitlements pe ele aiurea (va trebui sa aplic udev rules) pentru ca se amestecau porturile aleatoriu.
Config-ul e facut de mine,e posibil sa aiba erori, am tot modificat aseara pana tarziu, din confuzie, oboseala si nervi:
ident = 1880:000000,002011,002111 pe reader-ul 1802 nu avea ce cauta.
Daca mai vedeti erori, va rog sa scrieti, orice e constructiv e binevnit.
Multimesc pentru ajutor.