Satelit-Info.com

# Command line switches
#-H help show help
#-D daemon to run in daemon mode
#-V verbose
#-C [filename] use config filename to use a different configuration file / etc / wicardd.conf and. / Wicardd.conf
#-L [filename] use log filename
#-B [arg] configure WiBase configuration of radio bases
#-W [arg] configure WiCard configuration radiosonde
#-C calibrate mode
#-A spectrum analizer mode
#-R log rssi / lqi
#-L [channel] card logger logging protocol maps and radiosonde

#-W "arg = 1: arg1 =: arg2"
# Args:
# Show display settings radiosonde
# Devaddr = 1 .. 7 to assign address radiosonde
# Atrno = 0 .. 15 to use the ATR number 0-15
# Atrconf = additional protocol settings Access Card
# AtrX = 3B240030423030 set a value for the ATR number X (atr0 =, atr1 =, ... atr15 =)
# Freqno = 0 .. 3 use frequency channel 0-3
# Updatefw update the firmware of the radiosonde
# Calibrate calibrate the transmitter frequency ()

# Example: wicardd-w "devaddr = 3: atrno = 5: freqno = 1"

#-B "arg = 1: arg1 =: arg2"
# Args:
# Show display settings radio bases
# Freqno = 0 .. 3 use frequency channel 0-3
# Updatefw update the firmware radio bases

[Global] # global settings
log = / tmp / wicardd.log # name of the log file, the default output to the console
log_size = 1 # max log size in kilobytes
debug = 0 # include global debug messages 0 - off, 3 - detailed log
daemon = 0 # 1 - run in daemon mode
ecm_cache_size = 128 # ECM cache size
account_file =. / wicard.account # path to the file with the description of users
active = 0 # otlyuchenie section

[Webif] #
port = 8081 # HTTP server port
debug = 3 # logging level 0 - 3
active = 0 # otlyuchenie section


[Card.auto] # if a section is included - Added, will be automatically processes
# Process requests from radiosondes are not described in the section (s) [card]
cas = auto
channel = x
debug = 3
auto_update = 1
auto_idents = 1
send_null_ins = 1 # 60 team poison tuner (card is busy)
delay_after_ecm = 400
active = 0 # otlyuchenie section

[Server] # Server Configuration
type = newcamd525 # server type (supported newcamd525)
caid = 0500 # CAID coding system
ident = 020710 # add force ident (multiple - specify each on a new line)
! Ident = 023700 # exclude ident (makes sense for auto_idents = 1)
auto_idents = 1 # automatic import of all ident with reader devices with the same CAID
auto_update = 1 # enable EMM queries
au_reader = 0 # number of reader or the name of which will be sent EMM requests
ua = 01020304050607 # unique address / card number
sa = 07060504030201 # multicast address / card number
port = 15000 # server port
key = 0102030405060708091011121314 # DES key
filter = name, idx # list of used filters
debug = 3 # logging level 0 - 3
active = 0 # otlyuchenie section
ecm_queue_size = 8 # size of the request queue

# Source configuration section DCW
[Reader]
type = newcamd525 # type - the customer newcamd525
account = login: password @ host: 15000:0102030405060708091011121314
filter = name, idx # list of used filters
debug = 3
reconnect_delay = 10 # in seconds
keepalive = 0 # in seconds
active = 0 # otlyuchenie section
ecm_queue_size = 8 # size of the request queue




[Reader]
type = openxcas # built-in card reader AzBox
device = 0 # number of card reader
debug = 3 # logging level 0 - 3
handle_pts = 1 # enable the switching speed of the exchange with the access card
emm_process_delay = 10 #
write_delay = 0
filter = name, idx # list of used filters
active = 0 # otlyuchenie section
ecm_queue_size = 8 # size of the request queue


[Reader]
type = emuvia # emulator viaccess
debug = 3 # logging level 0 - 3
caid = 0500
file =. / SoftCam.Key # file with the keys
active = 0 # otlyuchenie section
ecm_queue_size = 8 # size of the request queue

[Reader]
type = emucworks # emulator CryptoWorks
debug = 3 # logging level 0 - 3
caid = 0D00
file =. / SoftCam.Key # file with the keys
active = 0 # otlyuchenie section
ecm_queue_size = 8 # size of the request queue

[Reader]
type = emubiss # Support yes BISS
debug = 3 # logging level 0 - 3
file =. / SoftCam.Key # file with the keys
active = 0 # otlyuchenie section
ecm_queue_size = 8 # size of the request queue



[Account] # user configuration section (repeated for each user)
# Ispulzuetsya to restrict access to the server as described in section [server]
login = wicard
password = wicard
auto_update = 1 # accept AU
filter = 0, name1, name2 # use the filter


# [Filter]
# Rule = [condition], [criteria], [assignment], [assignment], [action]
# Conditions:
# Caid, ident, class, sid, chid
# Caid = 0500,0 B00 - positive if caid request one of these
# Limit n, s, b, m - n s surprising number of requests for seconds
# Marked N - check request token (logical OR marker and N)
# Banned - check to the banks
# For all conditions supported by a logical NOT
# Caid! = 0500,0 B00 - positive if caid request differs from the above
#
# Assignment:
# Caid: = 0
# Ident: = 0
# Chid: = 0
#
# Steps:
# Accept - work request
# Reject - reject the request
# Skip N - N skip rules
# Mark N - mark request
# Ban N - ban on N minutes
# Fakecw - return empty CW

[Filter]
name = name
debug = 3
rule = caid = 500; ident = 030600; reject
rule = caid = 500; ident = 023700; accept
rule = caid = 4ae0; ident = 0; caid: = 4ae1; ident: = 11; accept
rule = fakecw