Specifications for VU + Solo ® SE 1080p Full HD Linux Receiver
Digital receiver for HDTV and radio programs. Main features are a 1300 MHz processor the VU + Solo SE. Experience high definition TV with your VU + Solo SE.
Transcoding function
Opera Browse
HbbTV
HDMI 1.4 connection
Plug & Play tuner
HD PIP
External 12 V power supply
Technical highlights:
1300 MHz Dual Core processor Mips
Plug & Play Tuner (DVB-S2, DVB-C / T, DVB-C / T / T2)
256MB Flash
1 GB DDR3 DRAM
1 x DVB Common Interface slot
1 x Smartcard-Reader (Xcrypt)
2 x USB
10/100 Mbit Ethernet Interface
SPDIF audio output optical (digital)
1 x HDMI 1.4 video / audio output (digital)
1 x RCA video output
2 x Audio Output (L / R) RCA (analog)
unlimited channel lists for TV / Radio
EPG (electronic program guide) support
Support of Bouquet lists
OSD in many languages and skin-support
automatic / manual channel search
DiSEqC 1.0 / 1.1 / 1.2, USALS
External 12V power supply
Power switch
VU + Solo SE Specifications:
DVB-S2 tuner
Input Frequency Range 950 ... 2150 MHz
Input Level - 65 dBm 25 dBm ...-
Tuner input F-connector
Input impedance 75 ohms
AFC capture range +/- 3.5 MHz
Demodulation QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbiraten 4.1, 3.1, 2.5, 1.2, 3.5, 2.3, 3.4, 5.4, 6.5, 9.8
Roll-off Factor 35%
Common Interface:
Common-Interface Power Consumption max. 0.35A / 5V
Video decoding:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
Aspect Ratio 4: 3/16: 9
Letterbox for 4: 3 TV-Device
Digital output:
Output Level 0,5 Vss on 75 Ohm
Sampling frequencies of 32 kHz, 44.1 kHz, 48 kHz
S / PDIF optical, coaxial (AC3)
Audio coding:
Audio compression MPEG-1 and MPEG-2 Layer II and I, MP3
Audio Mode Dual (main / sub), Stereo
Sampling frequencies of 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Analog output:
Output level L / R 0.5 Vss on 600 Ohm
THD> 60dB (1 kHz)
Crosstalk <-65 dB
Video parameters:
Input level 1 Vpp CVBS +/- 0:25 dB at 75 Ohm
Ethernet:
100/10 MBit compatible interface
USB:
USB 2.0 port (2x)
LNB power supply DVB-S2 Tuner:
LNB Current 400mA max. , Short-circuit proof
LNB Voltage horizontal "no load 19.5V" 17,6V at 400mA
LNB Voltage vertical "no load 14.5V" 11.8V at 400mA
LNB is switched off in standby mode
Control of the satellite position:
DiSEqC 1.0 / 1.1 / 1.2 and USALS - Rotor Control
Power consumption:
<13W (in operation, with LNB)
<12W (in operation, without LNB)
<0.5W (Deep-Standby-Mode)
External power supply:
Entrance:
110-240V AC / 50-60 Hz / 1.0A
Exit:
= 12V / 3.5A
General:
Ambient temperature + 15 ° C ... + 35 ° C
Humidity <80%
Dimensions (W x D x H): 211 mm x 185 mm x 40 mm
