How to install the BlackHole Prism image
Posted: 15 Jan 2014 12:57
1. Please download latest version of the BlackHole Prism image from this site and extract it from the zip file.You will find the directory update_ruby
2. Now please format your USB stick to FAT32 and copy folder "update_ruby" to root of the usb stick
3. Now plug the USB stick into the USB slot (found at the rear of your box).
4. Power on your Prismcube - after a while, it will automatically start to instal the software, and the display will show UPDATE.Your display will show numbers and letters as it is updating block by block the flash on your box
5. When complete, you will be asked to remove the usb stick - REMOVE USB
6. After removing the usb stick from the rear, the receiver will start booting
It will take a couple of minutes to fully reload, and then you will have full access to the menu system.
2. Now please format your USB stick to FAT32 and copy folder "update_ruby" to root of the usb stick
3. Now plug the USB stick into the USB slot (found at the rear of your box).
4. Power on your Prismcube - after a while, it will automatically start to instal the software, and the display will show UPDATE.Your display will show numbers and letters as it is updating block by block the flash on your box
5. When complete, you will be asked to remove the usb stick - REMOVE USB
6. After removing the usb stick from the rear, the receiver will start booting
It will take a couple of minutes to fully reload, and then you will have full access to the menu system.