Usb readere "by Gelvis"
Posted: 12 May 2015 13:34
Vreau sa imi exprim si eu opinia referitor la : "http://satelit-info.com/phpBB3/viewtopic.php?f=47&t=1914", si nu vreau sa continui in threadul de la shop, acolo e shop.
De la inceput, vreau sa spun ca, pe de o parte, mi se pare normal ce a spus @ASiX88796 despre garantie si retur, pe de alta parte, consider ca se putea ridica subiectul si putin altfel.
Pana la urma, suntem pe un forum, nimeni nu a obligat pe nimeni sa cumpere, si nu mi se pare normal sa cumperi fara sa ai minimul de cunostinta despre ce cumperi. Sau cumperi dar...taci.
On topic : gelvis dublu, cumparate de ceva ani, a mers "out of the box", pe orice oscam de atunci pana acum(acum e pe un Enfinity cu OSCam r10657).
Card HD+:
[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
services = hdplus,!hdplussky,!tvr,!tivùsat,!familia
caid = 1843
boxkey = A7...37C
rsakey = BF...D5
ecmnotfoundlimit = 20
ecmwhitelist = 1843:89
detect = cd
nagra_read = 2
mhz = 500
cardmhz = 368
ident = 1843:000000
group = 1
emmcache = 1,3,10,0
lb_weight = 500
2015/05/12 14:13:58 60F488 c (ecm) xxx (1843&000000/0000/EF15/89:xxxx): found (378 ms) by hdplus - RTLII HD
Card Tivusat:
[reader]
label = tivuUSB
protocol = mouse
device = /dev/ttyUSB1
services = !hdplus,!hdplussky,!tvr,tivùsat,!familia
caid = 183D
boxkey = 3...7
rsakey = A92...B5
ecmnotfoundlimit = 20
ecmwhitelist = 183D:91
detect = cd
nagra_read = 2
mhz = 600
cardmhz = 368
ident = 183D:000000,005411
group = 2
emmcache = 1,3,10,0
lb_weight = 500
2015/05/12 14:23:07 60F488 c (ecm) xxx (183D&000000/0000/0009/91:xxx): found (138 ms) by tivuUSB - Mediaset EXTRA
Card TVR:
[reader]
label = tvrUSB
protocol = mouse
device = /dev/ttyUSB2
services = !hdplus,!hdplussky,tvr,!tivùsat,!familia
caid = 0500
ecmnotfoundlimit = 20
ecmwhitelist = 0500:61
detect = cd
mhz = 357
cardmhz = 357
group = 3
emmcache = 1,3,10,0
Ecm undeva la 120ms (nu am pe nimeni acum sa pun un copy/paste).
Card Focus:
[reader]
label = FocusUSB
protocol = mouse
device = /dev/ttyUSB3
services = !hdplus,!hdplussky,!tvr,!tivùsat,familia
ecmnotfoundlimit = 20
ecmwhitelist = 0B02:4C
detect = cd
mhz = 357
cardmhz = 357
group = 4
emmcache = 1,3,10,0
2015/05/12 14:27:43 621220 c (ecm) xxx (0B02&000000/0000/76CC/4C:xxx): found (222 ms) by FocusUSB - Antena1
Setarile sunt in urma trial&error, cu un timp de raspuns acceptabil (ptr. mine). Am cautat stabilitate, nu viteza. Fiecare isi configureaza dupa pricepere/nevoi. NU dati copy/paste cu setari "de pe net", s-ar putea sa tipati pe forum ca "nu merge".
Atentie : pe cititor mai sunt niste jumpere, folositii conform cu configuratia necesara.
De la inceput, vreau sa spun ca, pe de o parte, mi se pare normal ce a spus @ASiX88796 despre garantie si retur, pe de alta parte, consider ca se putea ridica subiectul si putin altfel.
Pana la urma, suntem pe un forum, nimeni nu a obligat pe nimeni sa cumpere, si nu mi se pare normal sa cumperi fara sa ai minimul de cunostinta despre ce cumperi. Sau cumperi dar...taci.
On topic : gelvis dublu, cumparate de ceva ani, a mers "out of the box", pe orice oscam de atunci pana acum(acum e pe un Enfinity cu OSCam r10657).
Card HD+:
[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
services = hdplus,!hdplussky,!tvr,!tivùsat,!familia
caid = 1843
boxkey = A7...37C
rsakey = BF...D5
ecmnotfoundlimit = 20
ecmwhitelist = 1843:89
detect = cd
nagra_read = 2
mhz = 500
cardmhz = 368
ident = 1843:000000
group = 1
emmcache = 1,3,10,0
lb_weight = 500
2015/05/12 14:13:58 60F488 c (ecm) xxx (1843&000000/0000/EF15/89:xxxx): found (378 ms) by hdplus - RTLII HD
Card Tivusat:
[reader]
label = tivuUSB
protocol = mouse
device = /dev/ttyUSB1
services = !hdplus,!hdplussky,!tvr,tivùsat,!familia
caid = 183D
boxkey = 3...7
rsakey = A92...B5
ecmnotfoundlimit = 20
ecmwhitelist = 183D:91
detect = cd
nagra_read = 2
mhz = 600
cardmhz = 368
ident = 183D:000000,005411
group = 2
emmcache = 1,3,10,0
lb_weight = 500
2015/05/12 14:23:07 60F488 c (ecm) xxx (183D&000000/0000/0009/91:xxx): found (138 ms) by tivuUSB - Mediaset EXTRA
Card TVR:
[reader]
label = tvrUSB
protocol = mouse
device = /dev/ttyUSB2
services = !hdplus,!hdplussky,tvr,!tivùsat,!familia
caid = 0500
ecmnotfoundlimit = 20
ecmwhitelist = 0500:61
detect = cd
mhz = 357
cardmhz = 357
group = 3
emmcache = 1,3,10,0
Ecm undeva la 120ms (nu am pe nimeni acum sa pun un copy/paste).
Card Focus:
[reader]
label = FocusUSB
protocol = mouse
device = /dev/ttyUSB3
services = !hdplus,!hdplussky,!tvr,!tivùsat,familia
ecmnotfoundlimit = 20
ecmwhitelist = 0B02:4C
detect = cd
mhz = 357
cardmhz = 357
group = 4
emmcache = 1,3,10,0
2015/05/12 14:27:43 621220 c (ecm) xxx (0B02&000000/0000/76CC/4C:xxx): found (222 ms) by FocusUSB - Antena1
Setarile sunt in urma trial&error, cu un timp de raspuns acceptabil (ptr. mine). Am cautat stabilitate, nu viteza. Fiecare isi configureaza dupa pricepere/nevoi. NU dati copy/paste cu setari "de pe net", s-ar putea sa tipati pe forum ca "nu merge".
Atentie : pe cititor mai sunt niste jumpere, folositii conform cu configuratia necesara.