Probleme Oscam

[dMd]

CIteste aici : viewtopic.php?f=7&t=64&p=16309#p16218
La data de 07.07.2015 focus a facut ceva schimbari ...
la ecmwhitelist in afara de 4C a aparut si 53
iar la ecmheaderwhitelist avem .... 80704970424320,80705070496321,81704970424320,81705070496321

label = focussat
protocol = internal
device = /dev/sci0
caid = 0B02
ecmwhitelist = 0B02:4C,53
ecmheaderwhitelist = 0B02:80704970424320,80705070496321,81704970424320,81705070496321
detect = cd
mhz = 450
cardmhz = 3150 #(3150 pt. E1_dm500S; 2700 pt. E2 mipsel)#
ident = 0B02:000000
group = 1
emmcache = 1,1,2,0
auprovid = 000B02

[alexz]

2015/07/16 13:18:53 60A7041D c (ecm) dvbapi (0B02@000000/0000/76C2/53:060569BEFD74672B9B79292D9ACFD62E): rejected group (3 ms) - TVR 1 (no matching reader)
2015/07/16 13:18:53 60A7041D c (ecm) dvbapi (0B02@000000/0000/76C2/53:060569BEFD74672B9B79292D9ACFD62E): rejected group (2 ms) - TVR 1 (no matching reader)
2015/07/16 13:18:53 60A7041D c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2015/07/16 13:18:53 60A7041D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 15E6 ANY CHID PMTPID 0096 VPID 0097
2015/07/16 13:18:54 60A7041D c (ecm) dvbapi (0B02@000000/0000/76C2/53:060569BEFD74672B9B79292D9ACFD62E): rejected group (3 ms) - TVR 1 (no matching reader)
2015/07/16 13:18:54 60A7041D c (ecm) dvbapi (0B02@000000/0000/76C2/53:060569BEFD74672B9B79292D9ACFD62E): rejected group (0 ms) - TVR 1 (no matching reader)
2015/07/16 13:18:54 60A7041D c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2015/07/16 13:18:54 60A7041D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B02 PROVID 000000 ECMPID 15E6 ANY CHID PMTPID 0096 VPID 0097
2015/07/16 13:18:54 60A7041D c (ecm) dvbapi (0B02@000000/0000/76C2/53:060569BEFD74672B9B79292D9ACFD62E): rejected group (3 ms) - TVR 1 (no matching reader)
2015/07/16 13:18:54 60A7041D c (ecm) dvbapi (0B02@000000/0000/76C2/53:060569BEFD74672B9B79292D9ACFD62E): rejected group (0 ms) - TVR 1 (no matching reader)

[zmeura]

Modifica denumirea userului dvbapi din config si din oscam.user,pune altceva in loc de "dvbapi",sa zicem "local".Dai save (in ambele parti) si restart la oscam si vezi daca asa mai da no matching reader.

PS: Era bine sa avem din log tot ce apare dupa restart,adica sa vedem daca initializeaza cardul.

[alexz]

multumesc `dMd`

[reader]
label = local_focus
protocol = internal
device = /dev/sci0
caid = 0B02
ecmwhitelist = 0B02:4C,53
detect = cd
ident = 0B02:000000
group = 1
emmcache = 1,1,2,0
auprovid = 000B02

mai o intrebare:la ce foloseste ecmheaderwhitelist si daca e folositor,sa posteze ce pun in el.

[zmeura]

Daca nu ai ecmheaderwhitelist lasa asa,macar pana lamuresti ce nu merge.Nu e important,nu te va ajuta sa iti deschida din local ,ideea era doar daca folosesti asa ceva sa stii ca au aparut modificari.Nu va complicati cu setari incurcate cand nu aveti nevoie de ele,ca sa deschida din local trebuie doar setari banale.

[dMd]

Asta e problema : ecmwhitelist = 0B02:4C,53
SI timpii de raspuns sunt diferiti intre 4C si 53
ecmheaderwhitelist poti trece in oscam.server .. insa nu te complica cu whitelist trecut pe canale (oscam.whitelist) daca nu stii cum si la ce foloseste pt. ca le dai iar peste cap si nu va funciona corect.

[zmeura]

Moo,nu sapati unde nu e problema.Eu am patit-o si odata a patit-o si nenea @aspersor.La mine s-a rezolvat daca am sters si refacut userul dvbapi,acum am gasit ca la el s-a rezolvat daca a refacut setarile de la zero,din webif.Asa e cu oscam,daca schimbi versiunile te poti trezi cu fisiere de configurare corupte sau nerecunoscute corect de noua versiune chiar daca le vezi ca text ca ar fi in regula :

Functioneaza !

Am refacut totul de la zero.
toate salvate cu webif-ul versiunii pe care-l folosesc acum.
Functioneaza bine fara erorile de dinainte.

Problema cred ca a fost in fisierul oscam.user, vad ca si acolo sint inregistrari gen loadbalancer, desii am refacut userul dvbapi de doua ori si tot asa s-a comportat.

Ideea e ca daca instalezi versiuni diferite de oscam, ar trebui sa faci toate configurarile de la zero ca sa nu mai apara asemenea fenomene.