Golden Interstar Xpeed

Broadcom E2
User avatar
Meridian
Gold User
Posts: 2314
Joined: 24 Sep 2013 12:43
Location: Andromeda

Golden Interstar Xpeed

Unread postby Meridian » 03 Oct 2013 19:58

Golden Interstar Xpeed LX 1

Image

Code: Select all

- Full HD DVB-S2 Receiver
- Linux operating system (E2)
- BCM7358 single core (700 mips)
- Based on the Open PLI 3.0
- Flash 512 MB
- RAM 512 MB
- 7-segment display
- 1x DVB-S2 tuner
- 2x Conax7 card reader
- RJ-45 10/100 Mbps Ethernet interface
- HDMI 1.3 output
- Scart output
- 2x USB (Vorder. - and back)
- PVR ready via USB
- RS 232
- SPDIF output
- Bluetooth ready via USB
- Power switch
- Blind scan function
- HbbTV capable
- IPTV capable (as a client)
- IP streaming
- Verschidene Images
- Web browser
- Webif streaming and screenshot
- Plugins
- And much more ...


Golden Interstar Xpeed LX 2

Image

Code: Select all

- Full H Full HD Twin / Combo Receiver
- Linux operating system (E2)
- BCM7358 single-core (700 mips)
- Based on the Open PLI 3.0
- Flash 512 MB
- RAM 512 MB
- VFD Display
- 2x DVB-S2 tuner or DVB-S2 Combo + T2-C HD (plug-tuner)
- 2x Conax7 card reader
- 1x Common Interface
- RJ-45 10/100 Mbps Ethernet interface
- HDMI 1.3 output
- Scart output
- 2 x USB (front - back)
- PVR ready via USB
- RS 232
- SPDIF output
- Bluetooth ready via USB
- Power switch
- Blind scan function
- HbbTV capable
- IPTV ready (as a client)
- IP streaming
- Verschidene Images
- Web browser
- Webif streaming and screenshot
- Plugins
- And much more ....


Golden Interstar Xpeed LX 3

Image

Code: Select all

- Quad Full HD / Combo Receiver
- 2x DVB-S2 fix, 2x DVB-S2 and 2x DVB-T2 / C tuner optional via plug
- Linux operating system (E2)
- BCM7424 Dual Core 2x 1.3 GHz (2x 3000 mips)
- Transcoding
- Based on the Open PLI 3.0
- Flash 2 GB
- RAM 1 GB
- VFD Display / OLED Display (optional)
- 2x Conax7 card reader
- 2x Common Interface
- 1GB Ethernet RJ 45 interface
- HDMI 1.3 output
- Scart output
- YUV component output
- 3x USB (1xVorder, - 2x rear)
- PVR ready via USB - SATA internal and external
- RS 232
- SPDIF output
- 4G LTE
- Bluetooth ready via USB
- Power switch
- Blind scan function
- HbbTV capable
- IPTV ready (as client and server)
- IP streaming
- Different Images
- Web browser
- Webif streaming and screenshot
- Plugins
- And much more ....


How to update the Golden Interstar Xpeed LX

Code: Select all

- Copy the SW to any USB device
- Unzip the SW in USB device
- After unzip you will get folder "xpeedlx"
- Switch off your Receiver in rear side with power switch
- Insert the USB device to any USB port
- Switch on the Receiver by power switch
- Update will start automatically
- If update finish the Receiver will show message in display
- Switch off the Receiver by power switch
- Remove the USB device
- Switch on Receiver by power switch
- Done


Download SW


Remote

Image


WIFI Stick

Image

Code: Select all

- 150 Mbps
- 2.4 GHz
- High transmission power
- Ideally suited for our Xpeed receivers
- Plug and play
******* Ich weiss, dass ich nichts weiss, und darum weiss ich mehr, als andere wissen! *******
Image

Return to “Broadcom E2”

Who is online

Users browsing this forum: No registered users and 14 guests