DM920 UHD - 4K

Receptoare 4K
User avatar
andym02
Advanced User
Posts: 923
Joined: 06 Mar 2014 19:18
Location: Belgravistan
Contact:

DM920 UHD - 4K

Unread postby andym02 » 20 Feb 2018 10:10

o mica prezentare .

Image

High End re-defined: Dreambox DM920 ultraHD
Multistream, FBC, FPGA for parallel CI usage, 8 GB Flash

Code: Select all

The new DM920 ultraHD is simply packed with superlative features: variable tuner configuration with FBC and Multistream based on an innovative Broadcom chipset, two CI slots that can be used in parallel, 8 GB flash memory as well as an HDD slot that holds all types of 2.5 inch HDD units. You won’t find more high end for significantly less than 400 Euros anywhere. The new DM920, which has been expected for a long time, will be launched into the trade in early December.

Two tuner slots on the rear panel of the new Dreambox flagship provide hitherto unknown flexibility in terms of TV reception. The DM920 is available in different versions: equipped with a twin tuner for satellite reception, respectively with the hybrid DVB-C/T2 tuner for the reception of digital cable and DTT, the Dreambox will be available in the trade at a RRP of 349 Euros. The RRP for the version featuring the Multistream-enabled Triple DVB-S2X MS tuner is 369 Euros.

The new Dreambox DVB-S2X twin tuner with FBC technology for parallel access to as many as eight transponders will be made available at the same price. The tuner is based on the Broadcom chip BCM45308x, and is the first receiver on the market to use this chipset. The second plug-in slot provides many options of combinations with the wide-ranging series of tuners for the Dreambox, to which a DVB-C tuner with FBC support will be added shortly.

This unique variability continues seamlessly with the front panel CI slots, which are based on integrated FPGA technology, allowing them not only to be allocated to the appropriate receiver sections independently of each other, but also to provide parallel usage as well. Once again, the Dreambox DM920 ultraHD sets new standards for the technological performance of Linux-based set-top boxes.

And that is not all, by far: compared to the predecessor model, the flash memory is twice as large in the DM920, the 8 GB provide sufficient capacity even for future applications. The HDD slot on the rear panel can accommodate 2.5 inch hard drives, and additionally provides a height of up to 15 millimetres, which will fit all commercially available 2.5 inch heard drive models, including special sizes.

In spite of this tremendous range of features, the DM920 ultraHD retains the compact dimensions of its predecessor. The futuristic design in a black chassis with a on/off touch sensor and large colour LCD on the front panel has long since established itself as a brand characteristic of the visionary 900 series. The DM920 ultraHD underlines the status the Dreamboxes hold as the innovative receiver solution for digital video.

Technical Details Dreambox DM920 ultraHD

Code: Select all


    Dreambox OS
    Dreambox API
    CPU: Dual-Core 12K DMIPS
    2 x HDMI 2.0 (input and output)
    2 Plug&Play tuner slots
    3” Color LC-Display
    Touch on/off
    MPEG-2/H.264 decoder (Full HD)
    H.265 decoder (Ultra HD)
    Smartcard reader
    SD-Card reader
    2 Common Interface slots (CI)
    FPGA technology
    2 GB RAM
    8 GB Flash (EMMC)
    Gigabit Ethernet interface
    USB 3.0
    Mini USB service port (Flash rescue)
    S/PDIF digital bitstream out
    Automatic service scan
    2,5” harddisk slot for optional HDD up to 15 mm height
    WiFI support (optional)
    Web interface for PC and smartphone
    DiSeqC 1.0, 1.1, 1.2, USALS, Unicable
    Multistream support
    FBC technology
    Size: 270 x 187 x 60 mm (W x D x H)



https://dreambox.de/en/dm920-ultrahd
nicu
New member
Posts: 10
Joined: 25 Apr 2014 18:05

Re: DM920 UHD - 4K

Unread postby nicu » 20 Feb 2018 11:23

sal sint nicu si va rog sa imi dati un sfat ... oare de ce nu vede useri conectati nici el pe mine nici eu pe el

cauza are fi urmatoarle procesorul astea arm stie oscam sau pierdere de timp omul a dat o groaza de bani ....

ia-m zia asa sa intre la www.whatmyipscanner .. sa pun port 12000 care are ..daca apare verde normal trebuie sa apara useri ... baiul oare unde este sa fie img ?

sa fie dydns ...neupedat ??????
User avatar
andym02
Advanced User
Posts: 923
Joined: 06 Mar 2014 19:18
Location: Belgravistan
Contact:

Re: DM920 UHD - 4K

Unread postby andym02 » 20 Feb 2018 11:39

intai sa porneasca oscam , se verifice daca lui ii deschide , adica daca vede ceva pe TV'ul lui.
dupa ce a rezolvat acest aspect , trece si face setarile pentru a vedea si " colaboratorii" lui.
in loc de host pune IP'ul ce-l are alocat de la provider ( asta doar ptr test ) , setarile sa fie ok in router , setarile ok in oscam.conf , oscam.user , oscam.server , daca astea-s in regula .... nu exista NU functioneaza :hehih:
portul ce-l folosesti in oscam.conf , sa fie acelasi cu cel din router , uite orientativ :
#oscam.conf
...............................................................
[cccam]
port = 12000 sau ce port doreste omu
nodeid = 79DB639XB52
version = 2.3.0
.................................................................

cum a zis aia mica , succesuriiiii ! :hehih:
nicu
New member
Posts: 10
Joined: 25 Apr 2014 18:05

Re: DM920 UHD - 4K

Unread postby nicu » 20 Feb 2018 11:52

ady astea ia-m spus si eu sa faca ...!!! :agree:
nicu
New member
Posts: 10
Joined: 25 Apr 2014 18:05

Re: DM920 UHD - 4K

Unread postby nicu » 20 Feb 2018 11:54

intru diseara la el cu team oare este problema cu procesorul astea arm7 ? difera mult de ce stim noi cum are fi sh4 sau altele este mai complicat ??? ca ma gandesc si la astea ...!!!! arm7 4k hmmm
User avatar
andym02
Advanced User
Posts: 923
Joined: 06 Mar 2014 19:18
Location: Belgravistan
Contact:

Re: DM920 UHD - 4K

Unread postby andym02 » 20 Feb 2018 11:58

da o cautare pe gooagle si vezi ce se spune despre arm7 ...
n-am trecut inca la 4K
:tong:
User avatar
dMd
Gold User
Posts: 1550
Joined: 11 Sep 2013 16:29

Re: DM920 UHD - 4K

Unread postby dMd » 20 Feb 2018 12:06

Nu este nici o problema cu nici un procesor, receptor sau oscam. Singura problema este ca ele iti ofera doar ceea ce stii sa le ceri, cand iei ceva ce te depaseste si nu te documentezi inainte, ajungi sa dai vina pe orice, numai pe ce trebuie nu dai vina. Daca amicul a cumparat un DM920 ca il seteze altii prin team a facut cea mai mare greseala si chiar a dat banii de pomana pe un receptor de top.
Image Image Nu putem avea tot timpul dreptate.

Return to “UHD Receivers”

Who is online

Users browsing this forum: No registered users and 4 guests