GigaBlue HD 800 E2 Control Centre Version 1.0

User avatar
dMd
Gold User
Posts: 1550
Joined: 11 Sep 2013 16:29

GigaBlue HD 800 E2 Control Centre Version 1.0

Unread postby dMd » 25 Nov 2013 16:06

Code: Select all

Installation Instructions
-------------------------
Unzip all the files and folders in the zip file to your local hard drive.

How to Use GBCC
---------------
1. Run the GBCC.exe application.
2. Enter the IP address of your receiver in the IP Address field, example 192.168.1.5
If your using a private local IP address enter the IP like this: 010.000.000.001
3. If you have changed the password on your receiver, enter the password in the password field
otherwise leave blank.
4. Click Connect Button

Telnet
------
Self explanatory.
For a list of Busybox commands check out the following website:
http://www.busybox.net/downloads/BusyBox.html

FTP
---
Click the FTP Button.
This will load FileZilla FTP Client and automatically connect to your receiver.
For instructions on using FileZilla check out the following website:
http://wiki.filezilla-project.org/Using

Settings Backup
---------------
Click on Settings Backup Button.
Click the Backup Settings Button.
This will backup all the settings from the receiver to the enigma2, tuxbox and cfg folders on your PC HDD.
The enigma2, tuxbox and cfg folders will be located in the same folder as this program.

Click the Restore Settings Button.
All your backup data will be restored to the receiver.
Once the files have successfully been restored you'll need to reboot the receiver by powering off
and on using the switch on the back of the receiver.

Media Files Manager
-------------------
Uploading a Media File:
Select the Hard Drive and folder that contains your Media File.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Local file or files you want to upload so it's highlighted in blue.
Click the Upload Button to transfer the file or files from your local HDD to the receiver.

Downloading a Media File:
Select the Hard Drive and folder that you wish the file or files to be transferred too.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Remote file or files you want to download so it's highlighted in blue.
Click the Download Button to transfer the files from the receiver to your local HDD.

Deleting Local File:
Select Local file so it's highlighted in blue.
Click Delete Local File Button.

Deleting Remote File:
Select remote file so it's highlighted in blue.
Click Delete Remote File Button.

HDD Manager
---------------
To mount and format a Hard Disk Drive do the following:
Select USB Hard Disk.
Click the Format Button.

This will erase all the data on the receiver's selected HDD.

Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
You'll see a command prompt like one below when the format has completed.

root@GigaBlue>

WebControl
--------------
Click the WebControl Button to open WebControl in your default web browser.


Upload Channel List
-------------------
Select the local directory where the Channel List is sorted.
Double click the folder to list the files.
Click the "Upload Channel List" Button.
When you see the "Channel List Uploaded! Reboot receiver" message box appear click OK.
Now Reboot receiver by powering off and on.

IPK Installer
-------------
Click the "..." Button to select the local directory where the "ipk" file is located.
Now click the "Upload and Install IPK File" Button.
The selected "ipk" file will be transferred to the /tmp folder then installed.
Details of the installation will be viewable in the terminal window.

Version History:
----------------
Version 1.0 Released 24-02-2012

DOWNLOAD GBCC


Image
Image Image Nu putem avea tot timpul dreptate.

Return to “Plugins, Skins, Tools”

Who is online

Users browsing this forum: No registered users and 15 guests