- Descarcati imaginea arhivata destinata modelului vostru de receptor;
- Dezarhiva-ti fisierele si ar trebui sa rezulte un folder denumit vuplus in interiorul caruia veti avea alt folder denumit dupa modelul vostru de receptor;
- Copiati pe stick folderul vuplus cu toate subfolderele incluse;
- Daca aveti un folder cu denumirea vuplus pe un orice alt dispozitiv conectat la receptor stergeti acel folder sau redenumiti-l;
- Opriti receptorul
- Introduceti stick-ul in USB-ul frontal
- Porniti receptorul.
To install a new image, you need an empty USB stick FAT32 formatted.
- Download image zip file for your Vu+ model;
- Unzip the zip file and you will have a folder named vuplus and under the folder, you will have another folder named after the model of your VuPlus set;
- Copy the vuplus folder (including all the sub folders and files in it) to root folder of your USB stick;
- If you have any folder named vuplus on any device connected to your Vu+, delete the folder or rename it;
- Turn off your Vu+;
- Insert the USB stick to the front USB port on the set;
- Turn on your Vu+.
Vu+ Duo
Update-ul este gata cand este afisat pe display mesajul "upgrade completed".
Update is done when upgrade completed message is shown on the display.
Vu+ Duo2
Apasati butonul POWER de pe receptor (nu cel de pe telecomanda!) cand apare mesajul pe display.
Update-ul este gata cand este afisat pe display mesajul "upgrade completed".
Push POWER button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.
Vu+ Solo
Update-ul este gata cand ledul verde de pe panoul frontal clipeste.
Update is done when green light blinks on the front panel.
Vu+ Solo2
Apasati butonul POWER de pe receptor (nu cel de pe telecomanda!) cand apare mesajul pe display.
Update-ul este gata cand este afisat pe display mesajul "upgrade completed".
Push POWER button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.
Vu+ Ultimo
Apasati butonul - de pe receptor (nu cel de pe telecomanda!) cand apare mesajul pe display.
Update-ul este gata cand este afisat pe display mesajul "upgrade completed".
Push - button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.
Vu+ Uno
Apasati butonul CH- de pe receptor (nu cel de pe telecomanda!) cand apare mesajul pe display.
Update-ul este gata cand este afisat pe display mesajul "upgrade completed".
Push CH- button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Daca ,dintr-un motiv necunoscut,upgrade-ul esueaza,prima data deconectati orice alt dispozitiv conectat pe USB si incercati din nou instalarea imaginii.
Daca upgrade-ul tot nu reuseste incercati cu alt stick USB.Puteti incerca si un upgrade de CFE ca ultima solutie.
If, for any reason, the upgrade fails, first disconnect any USB devices connected to your Vu+ and then try again to install the new image.
If the upgrade fails again, try to use another USB stick.You can try to upgrate CFE,too.